Fitting or changing the bands is a fairly easy process, but a tiny bit fiddly for some.
Step 1: Locate the bolt of the quick-release, spring-loaded pin.
On the back of each strap, you'll notice a small silver pin where the strap meets the watch body.
Rotate and swivel the bolt, so that it sits proud of its cutout window and is easier to grab.
Step 2: Pull the pin to release the strap!
Using your fingernail, a key, or something with a hard edge, pull the bolt of the pin towards the middle of the strap.
The pins are spring-loaded and only require a few millimeters of movement to be free of the hole they are seated in.
Note: In some cases, when using a quick-release pin for the first time, they may be slightly stiff. Loosen by pulling it down a couple of time and the mechanism will become much easier to work with.
Step 3: You're finished!
To fit another band, it's the same process, in reverse! (Obviously!)
Once you have the band fitted, swivel or rotate the pin bolt downwards so that it sits flush in its cutout window.
Note: Seat the spring-loaded bolt side last when attaching a new strap.
If you are still having trouble, please contact us for more help!
Comments
0 comments
Article is closed for comments.